Any folks with plumbing experience?

[85Sooner]

I seemed to have poor pressure from my spray nozzel on the kitchen sink.

I took is apart to make sure it wasn't clogged. It wasn't. So I figured something else must be wrong. So, I went to Home Depot and bought a new one (sprayer). Hooked it up and the pressure is even worse.

The way I see it is that water comes up the pipes and goes first through/to where the sprayer is working. It the sprayer is not being used, then water comes out of the faucet. The pressure there is great BTW.

What am I doing that is wrong. Any ideas?

TIA

[1stTimeCaller]

when I bend over in the jeans I'm wearing today my crack shows. That's about my experience with plumbing.

[IB4OU2]

Check the prostrate thingy.......

[Mjcpr]

http://www.askmehelpdesk.com/forum/advice/t-4361.html

[GDC]

You'll have to replace the diverter or the whole faucet, depending on the brand.

[crawfish]

DC has lots of "plumbing experience".

If you know what I mean.

[RacerX]

You'll have to replace the diverter or the whole faucet, depending on the brand.

I second that.

[SOONER44EVER]

You'll have to replace the diverter or the whole faucet, depending on the brand.

Yep.

[85Sooner]

Thanks, I have no idea what that means. Where is the diverter? I'll try and find it but I am going to tackle this by wednesday.

[SOONER44EVER]

[85Sooner]

will I have to takethe whole assembly apart to change that?

THanks BTW

[SOONER44EVER]

will I have to takethe whole assembly apart to change that?

THanks BTW

Is it a single habdle or double handle faucet?

[85Sooner]

Single up down side to side, ya know

[SOONER44EVER]

There should be a big nut on the back end of the spout. You'll have to take that off. Make sure you turn the water off first. The diverter should just lift out.

[GottaHavePride]

Turn the water off before messing with your nut. Always a good call.