View Full Version : Need some metal cut. (modding pc tower)
Crimson Kid
2/1/2011, 02:17 AM
I'm modding a pc case and need a 12x12 square hole cut out on the side panel of my tower so i can add a viewing window.
The metal is pretty thin so it shouldn't take much to cut it out. I live in south okc so i need to find some place around here or someone that could do this.
Any ideas or where i might could get this done?
GKeeper316
2/1/2011, 04:55 AM
I'm modding a pc case and need a 12x12 square hole cut out on the side panel of my tower so i can add a viewing window.
The metal is pretty thin so it shouldn't take much to cut it out. I live in south okc so i need to find some place around here or someone that could do this.
Any ideas or where i might could get this done?
anyone with a drill and a hacksaw bladed jigsaw can do it. hell i could do it in about 10 minutes in my garage.
olevetonahill
2/1/2011, 06:04 AM
http://www.sears.com/shc/s/p_10153_12605_010W436365720001P?blockNo=17&blockType=G17&prdNo=17&i_cntr=1296558166132
Yer welcome, a Hacksaw might be to ruff if the metal is very thin.
Breadburner
2/1/2011, 06:44 AM
Find someone with a water-jet......
OUHOMER
2/1/2011, 06:58 AM
I am with Olevet, on this one, Plus you get to keep the cool tool..
you may have to buy a different blade, but they have hundreds of attachable blade for that thing.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.