StoopTroup
9/25/2007, 07:13 PM
I got this in an Email today.
I think it should be on Mythbusters for a confirmation check.
Although it sounds plausable....
I just don't know...
What does everyone here think?
Pumping Gas....Great tips
This is very helpful information!
I've been in the petroleum pipeline business for about 31 years,
currently working for the Kinder-Morgan Pipeline here in San Jose, CA.
We deliver about 4 million gallons in a 24-hour period from the pipe
line; one day it's diesel, the next day it's jet fuel and gasoline. We
have 34 storage tanks here with a total capacity of 16,800,000
gallons.
Here are some tricks to help you get your money's worth:
1. Fill up your car or truck in the morning when the temperature is
still cool. Remember that all service stations have their storage
tanks buried below ground; and the colder the ground, the denser the
gasoline. When it gets warmer gasoline expands, so if you're filling up in the
afternoon or in the evening, what should be a gallon is not exactly a
gallon. In the petroleum business, the specific gravity and temperature
of the fuel (gasoline, diesel, jet fuel, ethanol and other petroleum
products) are significant. Every truckload that we load is
temperature-compensated so that the indicated gallonage is actually
the amount pumped. A one-degree rise in temperature is a big deal for
businesses, but service stations don't have temperature compensation
at their pumps.
2. If a tanker truck is filling the station's tank at the time you
want to buy gas, do not fill up; most likely dirt and sludge in the tank is
being stirred up when gas is being delivered, and you might be
transferring that dirt from the bottom of their tank into your car's tank.
3. Fill up when your gas tank is half-full (or half-empty), because
the more gas you have in your tank the less air there is and gasoline
evaporates rapidly, especially when it's warm. (Gasoline storage
tanks have an internal floating 'roof' membrane to act
as a barrier between the gas and the atmosphere, thereby minimizing
evaporation.)
4. If you look at the trigger you'll see that it has three delivery
settings: slow, medium and high. When you're filling up do not squeeze
the trigger of the nozzle to the high setting. You should be pumping
at the slow setting, thereby minimizing vapors created while you are
pumping. Hoses at the pump are corrugated; the corrugations act as a
return path for vapor recovery from gas that already has been metered.
If you are pumping at the high setting, the agitated gasoline contains
more vapor, which is being sucked back into the underground tank, so
you're getting less gas for your money.
Hope this will help ease your 'pain at the pump'.
I think it should be on Mythbusters for a confirmation check.
Although it sounds plausable....
I just don't know...
What does everyone here think?
Pumping Gas....Great tips
This is very helpful information!
I've been in the petroleum pipeline business for about 31 years,
currently working for the Kinder-Morgan Pipeline here in San Jose, CA.
We deliver about 4 million gallons in a 24-hour period from the pipe
line; one day it's diesel, the next day it's jet fuel and gasoline. We
have 34 storage tanks here with a total capacity of 16,800,000
gallons.
Here are some tricks to help you get your money's worth:
1. Fill up your car or truck in the morning when the temperature is
still cool. Remember that all service stations have their storage
tanks buried below ground; and the colder the ground, the denser the
gasoline. When it gets warmer gasoline expands, so if you're filling up in the
afternoon or in the evening, what should be a gallon is not exactly a
gallon. In the petroleum business, the specific gravity and temperature
of the fuel (gasoline, diesel, jet fuel, ethanol and other petroleum
products) are significant. Every truckload that we load is
temperature-compensated so that the indicated gallonage is actually
the amount pumped. A one-degree rise in temperature is a big deal for
businesses, but service stations don't have temperature compensation
at their pumps.
2. If a tanker truck is filling the station's tank at the time you
want to buy gas, do not fill up; most likely dirt and sludge in the tank is
being stirred up when gas is being delivered, and you might be
transferring that dirt from the bottom of their tank into your car's tank.
3. Fill up when your gas tank is half-full (or half-empty), because
the more gas you have in your tank the less air there is and gasoline
evaporates rapidly, especially when it's warm. (Gasoline storage
tanks have an internal floating 'roof' membrane to act
as a barrier between the gas and the atmosphere, thereby minimizing
evaporation.)
4. If you look at the trigger you'll see that it has three delivery
settings: slow, medium and high. When you're filling up do not squeeze
the trigger of the nozzle to the high setting. You should be pumping
at the slow setting, thereby minimizing vapors created while you are
pumping. Hoses at the pump are corrugated; the corrugations act as a
return path for vapor recovery from gas that already has been metered.
If you are pumping at the high setting, the agitated gasoline contains
more vapor, which is being sucked back into the underground tank, so
you're getting less gas for your money.
Hope this will help ease your 'pain at the pump'.